1
Double-click on Programs, ThinkPad Configuration, Power
Management, and then Resume option.
2
Put a check mark in the Resume on incoming check box.
System-Management Features Software
The key software and their functions that provides the
system-management features of your computer are:
Desktop Management BIOS (DMI BIOS) Version 2.0
Desktop Management Interface (DMI) Version 1.1 defined by the
Desktop Management Task Force (upgradable to Version 2.0)
Intel LANDesk Client Manager Version 3.1
Client Services for NetFinity
Client-side functions of LCCM except for:
– Setup-Over-LAN (CMOS update)
– Administrator's (supervisor) password over LAN
The following sections describe this software.
Desktop Management BIOS (DMI BIOS) Version 2.0
DMI BIOS in your computer is based on Desktop Management
Interface BIOS (DMI BIOS) Specification Version 2.0.
Intel LANDesk Client Manager Version 3.1 (LDCM3.1)
Your computer contains the Intel LANDesk Client Manager
installation program
6
, which supports the DMI functions. Desktop
Management Interface (DMI) Version 2.0 is supported with LCDM3.1.
This application provides self-help diagnostic tools, including a PC
health meter that alerts you about potential problems, and hardware
and software inventories. It automatically polls hardware to detect
potential failure conditions, and it takes periodic snapshots of critical
configuration files for change management and restoration.
6
The installation program is in C:\LDCM3 . If you need to install Intel LANDesk Client Manager, run the SETUP.EXE program in this directory.
186 IBM ThinkPad 600 Online Book
To Next Page
Loading...
Need help?
General
