port replicator is not available, use one of the following two
alternative ways to install Windows NT:
Using an external CD-ROM drive in a DOS environment.
If you have an external CD-ROM drive that connects under a
DOS environment, you can install Windows NT in DOS:
1
Insert the Windows NT compact disc in the external
CD-ROM drive.
2
Go to the CD-ROM directory; then go to the \I386
directory.
For example, if your CD-ROM drive is drive D, go to
D:\I386
3
At the command prompt, type WINNT; then press Enter.
For example, D:\I386>WINNT
Follow the instructions on the screen.
Using a network server.
You can install Windows NT on multiple computers by first
copying the Windows NT master source files to a shared drive
on a network server. After connecting your computer to a
network, such as with the DOS LAN requester, you can install
the files from the network server to your computer at the DOS
command prompt.
For more information, refer to the Windows NT installation guide.
Installing the ThinkPad Configuration Program for Windows
NT
To install the ThinkPad Configuration program for Windows NT:
|
1
Start Windows NT and log on with the user ID authorized as an
| administrator.
2
Click on Start and Run.
3
Insert the Utility Diskette for Windows NT into the diskette
drive.
4
Type A:\SETUP and press Enter.
152
IBM ThinkPad 600 Online Book
To Next Page
Loading...
Need help?
General
