IBM ThinkPad 600 User Manual

Testing Your Computer
If you still have a problem with your computer after using the
Troubleshooting Charts, test the computer using the Easy-Setup
Test function.
To test your computer, do the following:
1 Press and hold F1; then turn on the computer to start
Easy-Setup. Hold F1 until the “Easy-Setup” menu
appears:
Date/Time Password
Easy-Setup
Start up
Test
Restart
Config
BIOS part number,..Date
System-unit serial number
System board serial number
Microprocessor
nnnnnnnnnnnnnnnn
nnnnnnnnnnn
Pentium( )Process
**
nnnnnnn
12/31/96
You will hear a short beep. If you are not sure whether you
heard a beep, press Fn+PgUp a few times to make the
speaker volume loud. Turn off the computer and try again. If
you still don't hear a beep, the speaker is not working. Have
your computer serviced.
130 IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT