IBM ThinkPad 600 User Manual

Problem Action
You cannot use PC Cards
other than IBM ones in
the OS/2 Warp
environment.
If you do not have the PC Card device driver for OS/2 but you have one for
DOS, your PC Card may run in the VDM (Virtual DOS machine) environment.
Refer to “Virtual Card Services” in Using a PC Card in OS/2 (with PC Card
Director) for setting the VDM and the sample configuration files on the PCMCIA
| Installation Diskette for OS/2, Windows 95. If the PCMCIA Installation Diskette
| for OS/2, Windows 95 did not come with the computer, create it using the
| Diskette Factory program. See the User's Reference .
PC Card support software
does not recognize your
PC Card.
Make sure that:
If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you
have the proper client device driver for the card. In Windows 95, the PC
Card must have an INF file associated with it.
Your PC Card supports PCMCIA Release 2.0, 2.01, and 2.10. Refer to the
manual that came with your PC Card. If your PC Card does not support
those release of PCMCIA, you cannot use PC Card Director. Contact your
PC Card supplier.
Your PC Card is working by following the diagnostic instructions for your PC
Card, if any.
The PC Card is
recognized by PC Card
support software, but the
“Not Ready” or “Not
Configured” message is
shown.
Make sure that:
The PC Card enabler is installed. Refer to the manuals supplied with your
PC Card.
If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you
have the proper client device driver for the card. In Windows 95, the PC
Card must have an INF file associated with it.
The resources for the PC Card are correctly reserved. Refer to Chapter 6,
Resolving System Resource Conflicts.
Docking Station Problems
122 IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Brand	IBM
Model	ThinkPad 600
Category	Laptop
Language	English