IBM ThinkPad 600 - Page 198

To set this function do either of the following:
1 Go to the Easy-Setup menu.
2 Double-click on the CONFIG icon.
The “Configuration” window appears.
3 Double-click on the Network icon.
The “Network” window appears.
4 Select either the Enable or the Disable button besides “Wake.”
5 Click on OK.
or
1 Go to the Easy-Setup menu.
2 Double-click on the Startup icon.
The “Startup” window appears.
3 Double-click on the Network icon.
The “Automatic Power On Startup Sequence” window appears.
4 Select either the Enable or the Disable button besides “Wake.”
5 Click on OK.
Setting Up for NetFinity Service: If you have NetFinity
Service 5.0 installed in the network and wish to use the Wake on
LAN function, do the following:
For Windows 95 systems:
Add the following line in the AUTOEXEC.BAT file in the root directory
of the boot drive:
SET NFWAKEONLAN=YES
For Windows NT systems:
1 Log on to the system with administrator privilege.
Appendix A. Using System Management 191