|
Setting the RingCentral Application for New Zealand
| The RingCentral** program allows you to set the number of rings for
| incoming messages before it answers the call.
| You can set the value by selecting:
| Options - Answering - Ring Options
| from the RingCentral menu.
| The values x and y in the following fields must be between 2 and 5:
| Answer after x rings if there are new messages.
| Answer after y rings if there are no new messages.
|
Caller ID Support
| The “Answering devices with caller ID support” can be used only
| where the caller ID services is available, currently only in the U.S.
| and Canada.
Chapter 2. Using Audio and Modem Features 13
To Next Page
Loading...
