Set the features for the serial port:
Disable the screen blanking function, and the standby and suspend timers:
Set the startup screen when the computer power is turned on:
Set the TrackPoint:
Other Commands
Display the help menu:
Set the A: drive to the external diskette drive:
Enter hibernation mode:
SERA Enable | Disable
ADDress
—
1 | 2 | 3 | 4
PRESENtation Enable | Disable —
STARTup Enable | Disable —
TPOint Enable | Disable |
AUTODisable
—
? | Help — —
FDD External | Internal —
Appendix B. Using PS2 Commands 205
To Next Page
Loading...
