IBM ThinkPad 600 User Manual

The names in the left list box (Available Cards) can be
registered. The names in the right list box (Selected Cards)
are already registered in Auto Configurator.
3 Click on the Add>> button.
4 Click on the Save button.
When a PC Card is installed, Auto Configurator starts from the
top of the list to assign the resources to the card.
Deleting a Registered Card
1 Double-click on the Auto Configurator Utility icon in the “PC
Card Director” window.
2 Select the PC Card you want to delete from Selected Cards in
the “Auto Configurator Utility” window.
3 Click on the Delete button.
4 Click on the Save button.
Changing the Registered Order for PC Cards
To change the order of the registered PC Cards, do the following:
1 Double-click on the Auto Configurator Utility icon from the
“PC Card Director” window.
2 Click on the Order... button in the “Auto Configurator Utility”
window. The following window appears:
3 Do as follows to change the order of the PC Cards in the list:
When moving a card toward the bottom:
64 IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT