IBM ThinkPad 600 User Manual

BASEDEV=PCM2ATA.ADD /!DM --→ ATA card device driver
DEVICE=C:\THINKPAD\FLSH2MTD.SYS --→ Flash Card Memory Technology driver
DEVICE=C:\THINKPAD\PCMSSDIF.SYS --→ Storage API device driver
DEVICE=C:\THINKPAD\PCM2SRAM.SYS --→ SRAM card device driver
DEVICE=C:\THINKPAD\PCM2FLSH.SYS --→ Flash card device driver
:
BASEDEV=OS2PCARD.DMD --→ Storage Card Device Manager
Rule 4 The Storage Card Device Manager (OS2PCARD.DMD) must be
added after the Power Management Support driver
($ICPMOS2.SYS) in the CONFIG.SYS file. If you do not have
the Power Management Support driver, the Storage Card
Device Manager must be added at the end of the CONFIG.SYS
file.
Parameters for the OS/2 PCMCIA ATA Card Device Driver
The following are the parameters and their explanations of the OS/2
PCMCIA ATA card device driver statement in the CONFIG.SYS file:
BASEDEV=PCM2ATA.ADD [/S:n] [/P:hhhh] [/EXIRQ:n]
[/NOBEEP] [/B] [/STBTIME:n] [/MDRV:n] [/!DM]
68
IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT