OS/2 PCMCIA Storage API Device Driver
This device driver provides a communication function between PC
Card Director or the mount utility and the OS/2 PCMCIA ATA card
device driver. As a result, a utility in the upper layer can get the
drive letter or partition information for the PCMCIA storage card.
The following is a line from the CONFIG.SYS file that describes the
Storage API device driver:
DEVICE=[drive:][directory]PCMSSDIF.SYS
Flash Card Memory Technology Driver
This driver is used to read and write to a Flash card. It is used by
the OS2 Flash card driver (PCM2FLSH.SYS).
The following is a line from the CONFIG.SYS file that describes the
Flash Card Memory Technology driver:
DEVICE =[drive:] [directory] FLSH2MTD.SYS
--→ Memory Technology driver
DEVICE =[drive:] [directory] PCM2FLSH.SYS
--→ Storage card device driver
Chapter 5. Using Your Computer with a PC Card 71
To Next Page
Loading...
