Using a docking station
9
Click the IDE Device tab.
10
In the IDE device in the docking station list box,
select Enable.
11
In the IDE Channel list box, select Third.
12
Click OK to close the “Docking station” window.
13
Restart the system by clicking OK in the warning dialog
box.
Setting to 2-Channel IDE mode
1
Open the ThinkPad Configuration program.
2
Click the Docking Station ( ) button.
The “Docking station” window appears.
3
Click Device Manager....
The “System Properties” window appears.
4
Click Computer; then click Properties.
5
Determine an available IRQ value other than IRQ 11 by
checking the current setting under the View Resources
tab. If there is no available IRQ value, you can make
space for it by removing a device that is not being used.
To do this, select the Device Manager tab; click the
device you are removing; and then click the Remove
button.
6
Click OK to close the “System Properties” window.
7
Return to the “Docking station” window; then click the
IRQ Holder for PCI Steering tab.
8
Change the IRQ value in 1st IRQ to the available value
you determined in step 5.
86 IBM ThinkPad 600X User's Reference
To Next Page
Loading...
Need help?
General
