Increasing memory
1. If either of the following occurs, power off the
computer and go to page 50 to reinstall the DIMM
and do the memory test with Easy-Setup (
page 155).
If a 2ð1 error code appears under the memory
count.
à
ð48576 KB OK
2ð1
If the total memory size is not the same as the
value you calculated.
2. If the 225 error code appears, the memory you are
installing is not supported by your computer.
3. If you have changed the memory installed in the
computer, you need to create a new hibernation file,
as follows:
a) Power off the computer.
b) Remove the DIMM you added.
c) Power on the computer, and disable hibernation
mode.
d) Add the DIMM.
e) Enable hibernation mode.
To disable and enable hibernation mode
Online User's Guide
.
How to calculate total memory size
Calculate your total memory size in kilobytes (KB) by adding
the DIMM memory size to the base memory size (64960 KB).
For example, if you installed a 32-MB DIMM into your computer
with 64-MB base memory, you should have about 96 MB.
Your computer might display memory size in kilobytes. For
example, 96 MB=97728 KB.
Note: 576 KB is reserved by the system.
Chapter 2. Extending the features of your computer 53
To Next Page
Loading...
