Increasing memory
7
Replace the memory slot cover over the memory slot,
aligning the back side of the cover first; then tighten the
screw.
8
Replace the battery pack. ( page 36.)
9
Turn the computer over again, and power it on.
10
Confirm that the new memory size appears at the upper
left corner of the screen.
For example, if you install a 32-MB DIMM into your computer
with 64-MB base memory, you should see the following. (See
the next page for how to calculate the total memory size.)
à ð
ð97728 KB OK
You have finished installing the DIMM. Reconnect all cables.
You can install two DIMMs. If you want to install a
second DIMM, repeat steps 4 through 6.
Make sure to align the notches on the socket with those
on the DIMM.
52 IBM ThinkPad 600X User's Reference
To Next Page
Loading...
Need help?
General
