iCharger Synchronous Balance Charger/Discharger 4010DUO
The input voltage is too high
The input voltage is too low
The output voltage is too high
The voltage of the connected battery
is too low
The voltage of the connected battery
is too high
"The internal temperature is too high"
The internal temperature is too high
"The internal temperature is too low"
The internal temperature is too low
"CH1 & CH2 common-negative connection prohibited"
Common-negative connected to
CH1&CH2 is prohibited
"Battery polarity reversed!"
Battery has been connected with
polarity reversed.
Internal control checking error
Safe time limit is exceeded
"Exceed safe capacity limit"
Safe capacity limit is exceeded
"Exceed safe temperature range"
Safe temperature range is exceeded
"Output connection broken"
Output connection is broken
"Balance port connection error"
Balance port has a connection error
"Low cell voltage detected on balance port"
Low cell voltage is detected on
balance port
"High cell voltage detected on balance port"
High cell voltage is detected on
balance port
"Voltage match error. Balance port sum is lower than
output."
Voltage matched error, the voltage of
the balance port sum is lower than
the output one
"Voltage match error. Balance port sum is higher than
output."
Voltage matched error, the voltage of
balance port sum is higher than the
output one
"Number of cells doesn't match the setting"
Number of cells connected doesn't
match the setting
"Number of cells setting appears low"
Number of cells setting appears low
To Next Page
Loading...
