Icom GM600 - DSC OPERATION AND MESSAGING; DSC Address ID Management

23
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
When the GM600 receives a request
for responsibility transfer from the CAM
system:
• The alert status becomes “Active –
Responsibility Transferred.”
• No alarms sound.
• The alert is not displayed on the BAM
list by default.
NOTE: The GM600 can receive the
request for responsibility transfer only
while receiving a valid HBT sentence
from the CAM system.
• See page 111 for the details of the
BAM alerts that the CAM system may
apply for responsibility transfer.
D Icon and Status
The icon varies, depending on the alert’s priority and status, as shown below.
Priority Icon Status Description Audible signal
Warning
Active –
Unacknowledged
Alert condition is still present.
Alert not acknowledged.
Yes
Active – Silenced
Alert condition is still present.
Alert not acknowledged but audible
signals have been silenced by the
operator.
No
Active –
Acknowledged
Alert condition is still present.
Alert acknowledged by the
operator.
Active –
Responsibility
Transferred
Alert condition is still present.
A function of the BAM compliant
equipment with additional system
knowledge has taken over.
Rectied –
Unacknowledged
Alert condition rectied.
Alert still unacknowledged.
None Normal No alert condition present.
Caution
Active Alert condition is present.
None Normal No alert condition is present.