13
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Selecting a regular channel
Selecting a channel in sequence:
➥ Rotate [CH/ENT].
➥ Push [∫] or [√].
Entering the desired channel
number:
➥ Push the keypad to directly enter the
desired channel number.
Example: Selecting Channel 22
Push [2
abc] → [2 abc], and then push
[ENT] or [Set]
.
D Selecting Channel 16
Channel 16 is the distress and safety
channel. It is used for establishing
initial contact with a station, and for
emergency communications.
While standing by, you must monitor
Channel 16.
➥ Push [16/C].
To recall the channel that was
displayed before selecting Channel 16:
➥ Push [CH] .
D Selecting the Call channel
You can set a Call channel for quick
recall.
To set your most used channel, see
page 14.
The default Call channel is Channel 16.
➥ Hold down [16/C] for 1 second.
To recall the channel that was displayed
before selecting the Call channel:
➥ Push [CH] .
■ Selecting a channel
To Next Page
Loading...
Need help?
General
