Icom GM600 - Scan Operation; Priority Scan; Normal Scan

26
SCAN OPERATION
6
■ Scan types
You can nd ongoing calls by scanning the Favorite channels
without rotating [CH/ENT].
The GM600 has two scan types.
• Priority scan (default)
• Normal scan
Before you start a scan:
• Set the desired channels you want to scan as Favorite
channels. (Scans only Favorite channels.) (p. 27)
• Set the desired scan type to “Normal" or “Priority.”
(p. 90)
NORMAL SCAN
A Normal scan sequentially searches all Favorite
channels. However, the scan does not check Channel 16
unless it is set as a Favorite channel.
CH 01
CH 02
CH 03
CH 04
CH 05
CH 06
PRIORITY SCAN
A Priority scan sequentially searches all Favorite channels
while also monitoring Channel 16.
CH 16
CH 01
CH 02
CH 03
CH 04
CH 05
CH 06
When a signal is received:
• On Channel 16
The scan pauses until the signal on Channel 16 disappears.
• On a channel other than Channel 16:
The scan switches to Dualwatch, until the signal disappears.