Icom GM600 User Manual

69
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
q When a Position Request call is received:
• An alarm sounds.
• The following screen is displayed.
• The backlight blinks when the BAM
function (p. 20) is OFF.
w Push any [Close] .
• When the BAM function (p. 20) is
OFF: Push any [Alarm OFF] .
e Select your desired action.
D Receiving a Position Request Call
[Hold]:
Holds the RX call task, and return to
the previous screen.
[Able]:
Sends an acknowledgment with
position and time data.
[Unable]:
Sends an acknowledgment with no
position and time data.
[Accept]:
Enters the DSC Task mode.
DSC Task mode
• Rotate [CH/ENT] to view the call
contents.
r Push [Home] to return to the
Main screen.
NOTE: When “Position ACK” is set to
“Auto (Able),” the transceiver automatically
replies to the call. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (Default: Manual)
[Pause]: Pauses the countdown.
• To restart the countdown,
push [Resume] .
[Accept]: Enters the DSC Task mode.
DSC Task mode
• Monitor the channel specied by the
calling station for an announcement
from the calling station.
(Example: Channel 16)
• Rotate [CH/ENT] to view the call
contents.
r Push [Standby Mode] to return
to the Main screen.
TIP: See page 54 for details of
sending an acknowledgment.

Icom GM600 Specifications

General

Brand	Icom
Model	GM600
Category	Transceiver
Language	English