70
8
DSC OPERATION
■ Receiving DSC calls (Continued)
q When a Position Request
acknowledgment is received:
• An alarm sounds.
• The following screen is displayed.
• When the BAM function (p. 20) is
OFF: The backlight blinks and the
popup screen is displayed.
Push any [Alarm OFF]
, and
then push any [Close Call RCVD
Window]
.
When the BAM function is OFF.
D Receiving a Position Report call
q When a Position Report call is
received:
• An alarm sounds.
• The following screen is displayed.
• The backlight blinks when the BAM
function (p. 20) is OFF.
w Push any [Close] .
• When the BAM function (p. 20) is
OFF: Push any [Alarm OFF] .
e Select your desired action.
[Hold]:
Holds the RX call task, and return to
the previous screen.
D Receiving a Position Request acknowledgment
•
Rotate [CH/ENT] to view the call
contents.
w Push [Home] to return to the
Main screen.
To Next Page
Loading...
