Icom GM600 - Page 69

63
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
[Accept]: Enters the DSC Task mode.
To send the acknowledgment,
push [Accept] .
DSC Task mode
• Automatically selects Channel 16, and
then monitor it, because a coast station
may require assistance.
• Rotate [CH/ENT] to view the call
contents.
r Push [Home] to return to the
Main screen.
q When a Distress Relay
acknowledgment is received:
• An alarm sounds.
• The following screen is displayed.
• When the BAM function (p. 20) is
OFF: The backlight blinks and the
popup screen is displayed.
Push any [Alarm OFF]
, and
then push any [Close Call RCVD
Window]
.
When the BAM function is OFF.
D Receiving a Distress Relay acknowledgment
• Automatically selects Channel 16, and
then you should monitor it, because a
coast station may require assistance.
• [PTT] is activated for voice
communication via Channel 16.
• Rotate [CH/ENT] to view the call
contents.
w Push [Home] to return to the
Main screen.
TIP: See page 47 for details of
sending acknowledgment.