Icom IC-7410 - Page 50

43
4
RECEIVE AND TRANSMIT
D Keyer set mode (continued)
0ADDLE0OLARITY7. $EFAULT./2-!,
Set the paddle polarity.
s.ORMALORREVERSEPOLARITYCANBESELECTED
Keyer Type 8. $EFAULT%,%#+%9
Select the keyer type for the [ELEC-KEY] connector
on the front panel.
s3TRAIGHTKEY"5'+%9OR%,%#+%9CAN BESE-
lected.
MIC Up/Down Keyer 9. $EFAULT/&&
Set the microphone [UP]/[DN] switches to be used
as a key. (The microphone [UP]/[DN] switches do not
work as a ‘squeeze key.’)
s/. 4HE;50=;$.=SWITCHESCANBEUSEDASAKEY
for CW.
s/&&4HE;50=;$.=SWITCHESCANNOTBEUSEDASA
key for CW.
./4%When “ON” is selected, the frequency and
memory channels cannot be changed using the
[UP]/[DN] switches.