Icom IC-7410 - Page 51

44
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N/PERATING2449&3+
When using your RTTY terminal or TNC, consult the
manual that comes with the equipment.
q Select the desired band. (p. 25)
w Push [RTTY] to select the RTTY mode.
s0USHING;2449=ALTERNATELYSELECTSTHE2449OR2449
reverse mode.
e Rotate [DIAL] to tune a desired signal.
 s4HE3METERINDICATESRECEIVEDSIGNALSTRENGTH
 s)FTHERECEIVEDSIGNALCANNOTBEDEMODULATEDTRYTOSE-
lect the RTTY reverse mode in step w.
 s4HETUNINGSTEPCANBECHANGEDINTHETUNINGSTEPPRO-
gram mode. (p. 27)
r Push [TRANSMIT] to set the transceiver to the
transmit mode, or transmit a SEND signal from your
TNC.
 s4HE48INDICATORLIGHTSRED
 s4HE0OMETER DISPLAYS THE TRANSMITTED2449SIGNAL
strength.
t Use your PC or TNC (TU) to transmit RTTY (FSK)
signals.
y Push [TRANSMIT] to return to receive.
#ONVENIENT2ECEIVEFUNCTIONS
s0REAMPANDATTENUATORP
s4WIN0"40ASSBAND4UNINGP
s!'#!UTO'AIN#ONTROLP
s.OISE"LANKERP
s.OISE2EDUCTIONP
s.OTCHlLTERP
s¼ function (p. 27)
sTwin Peak Filter (p. 47)
[RTTY] [DIAL]
[TRANSMIT] TX indicator
“RTTY” or “RTTY-R” appears
While receiving, the meter functions as the
RTTY tuning meter to make correct tuning
easier.
Rotate [DIAL] to the point where both sides of
the dots appear equally.
* While transmitting, the meter functions as the trans-
MITMETERSELECTEDBYPUSHING;!.4s-%4%2=