Icom IC-7410

77
SCANS
8
N3CAN3ETMODE
The scan speed and the Scan Resume function can
be set in the Scan Set mode.
q P ush [MENU] one or more times to display the “M2”
screen (Menu 2).
w Push [SCAN](F-1) to display the “SCAN” screen.
e Push [SET](F-5) to enter the Scan Set mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [DIAL] to select the desired option.
s(OLDDOWN;&=FORSECONDTORESETTOTHEDEFAULTSET-
ting.
y Push [MENU] to save, and return to the “SCAN”
screen.
u Push [MENU] again to return to the “M2” screen.
[SET] [SCAN]/[]
[MENU] [F-3] [DIAL]
[]
3#!.3PEED1. $EFAULT()'(
Select the desired scan speed between high and low.
s()'( 4HESCANISFASTER
s,/7 : The scan is slower.
3#!.2ESUME2. $EFAULT/.
Set the Scan Resume function ON or OFF.
s/. 7HENASIGNALISDETECTEDTHESCANPAUSESFOR
10 seconds, then resumes. When a signal dis-
appears, the scan resumes 2 seconds later.
s/&&7HENASIGNALISDETECTEDTHESCANISCAN-
celled.
SCAN ME M SWR TCON VSC
M2
PRO
 F
SPAN SE TFIN
SCAN
 F :  10k
Ú
SCAN Speed
Ù 1 HIGH
SET
Ú
SCAN Resume
Ù 2ON
SET