8-4
BASIC MANUAL
8
SET MODE
»
SET > Function
Auto Repeater (Default: ON (DUP))
L This item is displayed in only the USA version.
The Auto repeater function automatically turns the
•
• ON (DUP):
Turns ON the duplex settings only.
• ON (DUP, TONE): Turns ON the duplex settings
and the tone encoder function.
RTTY Mark Frequency (Default: 2125)
Selects the RTTY mark frequency.
L
automatically selected.
RTTY Shift Width (Default: 170)
Selects the RTTY shift width.
L
automatically selected.
RTTY Keying Polarity (Default: Normal)
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
ATV Audio Sub Carrier Frequency
Sets the audio subcarrier frequency in the ATV mode.
•
Does not receive and transmit audio signal
in the ATV mode.
•
•
•
»
SPEECH
SPEECH Language (Default: English)
Sets the speech language to English or Japanese.
Alphabet (Default: Normal)
Selects the type of phonetic announcement.
SPEECH Speed
RX Call Sign SPEECH (Default: ON (Kerchunk))
for calls received in the DV mode.
RX>CS SPEECH (Default: ON)
MIC Up/Down SPEECH
Turns the Microphone Up/Down Speech function ON
•
announced.
• ON: The frequency or repeater call sign is
announced, 1 second after pushing the
Memory, or Call channel mode, the frequency
is announced. When using the DR function,
the repeater call sign is announced.
S-Level SPEECH (Default: ON)
•
The operating mode and the operating
frequency are announced when you push .
• ON: The signal strength level, the operating mode,
and the operating frequency are announced
when you push .
MODE SPEECH
•
The selected operating mode is not announced.
• ON: The selected operating mode is announced.
SPEECH Level (Default: 50%)
To Next Page
Loading...
