1
PANEL DESCRIPTION
1-9
Previous view
Category: Channel/Scan (Continued)
MR-CH 1, MR-CH 2, MR-CH 3, MR-CH, 4
Push to directly select the set Memory channel (1, 2,
3 or 4).
Prio A, Prio B
Push to select the Priority A or Priority B channel.
Prio A (Rewrite), Prio B (Rewrite)
z Push to select the Priority A or Priority B channel.
z Hold down for 1 second to assign the operating
channel to the Priority A or Priority B channel.
Scan Start/Stop
<For the Simple key and Ten-key types>
z Push to start or cancel a Scan.
L When a scan started with the Power ON Scan or Auto
Scan function, pushing this key pauses the scan. The
paused scan resumes after the preset time period has
passed.
z Hold down for 1 second to display the Scan group.
Then push [CH Up] or [CH Down] to select a list.
NOTE: When Mode Dependent Scan is ON, a
user may not be able to display the Scan list,
depending on the presetting.
<For the Non-display type>
z While a scan is paused by detecting a signal,
hold down for 1 second to temporarily remove the
channel from the scan group.
After the scan is canceled, the removed channel
automatically returns to the scan group.
Scan Add/Del (Tag)
z Push to add a channel to, or delete it from the
current scan group.
• When a channel is added to the current scan
group, the display shows "SCAN ON."
• When a channel is deleted from the current scan
group, the display shows "SCAN OFF."
• After displaying "SCAN ON" or "SCAN OFF," the
current scan group text is displayed.
z You can add a channel to, or delete it from a
selected Scan group.
1. Hold down for 1 second to display the current
scan group, and then push [CH Up] or [CH Down]
to select a group.
2. Push this key to add a channel to, or delete it from
the selected group.
L When a channel is added to the selected scan group,
the display shows "SCAN ON."
L When a channel is deleted from the selected scan
group, the display shows "SCAN OFF."
3. Hold down this key to exit the Scan group
selection mode.
z While a Scan is paused by detecting a signal on a
channel (except for primary or secondary channel),
push this key to remove the channel from the Scan
group.
TIP: When the Nuisance Delete function is ON,
the removed channel is automatically added to the
Scan group again, after the Scan is canceled.
Talk Around
<For the Simple key and Ten-key types>
Push to turn the Talk Around function ON or OFF.
<For the Non-display type>
z Hold down for 1 second to turn ON the Talk Around
function.
z Push to turn OFF the function.
L The Talk Around function equalizes the transmit
frequency to the receive frequency, for transceiver-to-
transceiver communication.
Tone/RAN CH Select
In the Analog mode
Push to display the Continuous Tone screen. Then
push [CH Up] or [CH Down] to select a tone frequency
or code.
In the Digital mode
Push to display the RAN CH screen. Then push [CH
Up] or [CH Down] to select a RAN code.
Assignable Software Key functions (Continued)
To Next Page
Loading...
