Icom IC-F2100D Series - Assignable Software Key Functions

1
PANEL DESCRIPTION
1-6
Previous view
Category Assignable function Reference
Digital (NXDN) Analog
Conventional
Single-
site Trunk
2-Tone 5-Tone MDC BIIS
–
Disable p. 1-8
✓ ✓ ✓ ✓ ✓ ✓
Null p. 1-8
✓ ✓ ✓ ✓ ✓ ✓
Reset p. 1-8
✓ ✓ ✓ ✓ ✓ ✓
Shift
* p. 1-8
✓ ✓ ✓ ✓ ✓ ✓
Channel /
Scan
Bandwidth p. 1-8
N/A N/A
✓ ✓ ✓ ✓
CH Up
* , CH Down * p. 1-8
✓ ✓ ✓ ✓ ✓ ✓
C.Tone CH Select * p. 1-8
N/A N/A
✓ ✓ ✓ ✓
Encryption p. 1-8
✓ ✓
N/A N/A N/A N/A
High/Low p. 1-8
✓ ✓ ✓ ✓ ✓ ✓
Monitor p. 1-8
✓
N/A
✓ ✓ ✓ ✓
MR-CH1/2/3/4 p. 1-9
✓ ✓ ✓ ✓ ✓ ✓
Prio A, Prio B p. 1-9
✓ ✓ ✓ ✓ ✓ ✓
Prio A (Rewrite),
Prio B (Rewrite)
p. 1-9
✓ ✓ ✓ ✓ ✓ ✓
Scan Start/Stop p. 1-9
✓ ✓ ✓ ✓ ✓ ✓
Scan Add/Del (Tag)
* p. 1-9
✓ ✓ ✓ ✓ ✓ ✓
Talk Around p. 1-9
✓ ✓ ✓ ✓ ✓ ✓
Tone/RAN CH Select
* p. 1-9
✓
N/A
✓ ✓ ✓ ✓
Zone Select
* p. 1-10
✓ ✓ ✓ ✓ ✓ ✓
Zone Up
* , Zone Down * p. 1-10
✓ ✓ ✓ ✓ ✓ ✓
Signaling /
Call
Call p. 1-10
N/A N/A
✓ ✓
N/A N/A
Call A, Call B p. 1-10
N/A N/A
✓ ✓
N/A N/A
Call Alert p. 1-10
✓ ✓
N/A N/A
✓
N/A
Re-dial p. 1-10
✓ ✓ ✓ ✓ ✓ ✓
Call List Select
* p. 1-10
✓ ✓ ✓ ✓
N/A N/A
Call List Up
* ,
Call List Down *
p. 1-10
✓ ✓ ✓ ✓
N/A N/A
Digital Button
* p. 1-10
✓ ✓
N/A N/A N/A N/A
DTMF Autodial p. 1-10
✓ ✓ ✓ ✓ ✓ ✓
Emergency p. 1-11
✓ ✓ ✓ ✓ ✓ ✓
Group
* p. 1-11
✓ ✓
N/A N/A N/A N/A
Individual
* p. 1-11
✓ ✓
N/A N/A N/A N/A
ID-MR Select
* p. 1-11
N/A N/A N/A
✓
N/A N/A
Assignable Software Key functions
✓: Applicable
N/A: Not Applicable
Depending on the transceiver’s model type, some functions may not be assignable.
* For only the Simple key and Ten-key types.
► Continued on the next page