23
7
CALL PROCEDURE
7
2001 NEW
■ Group call
When you use DSC for calling the desired ship’s
group, use “Group” menu.
q Push [MODE
SET
] to select the DSC menu.
w Rotate [CH] to select “Group” then push [ENT].
e Select the desired 9-digit group code, then push
[ENT].
•Use [CH] to select the group code when the desired
group is pre-programmed.
• When “Manual set” is selected, enter the desired
code (last 8 digits only) via the keypad.
- The first digit “0 (zero)” is fixed for group code.
r Rotate [CH] to select the desired pre-programmed
traffic frequency, or “Manual set” then push
[ENT].
✔ When the pre-programmed call frequency is se-
lected, go to step t.
• When “Manual set” is selected, enter the desired
traffic frequency via the keypad.
t Rotate [CH] to select the desired pre-programmed
calling frequency, or “Manual set” then push
[ENT].
✔ When the pre-programmed call frequency is se-
lected, go to step y.
• When “Manual set” is selected, enter the desired
calling frequency via the keypad.
y The calling stand-by screen is displayed as fol-
lows, verify the calling condition then push and
hold [CALL] for 1 sec. to transmit the group call.
• Push and hold [ENT] for 1 sec. to store the calling con-
dition into TX memory described in pages 22 and 37, if
desired.
u After sending the call, the traffic frequency is se-
lected automatically.
i Announce the following message to stations.
- “The group name.”
- “This is ..... (your ship name).”
- The 9-digit identity OR call sign (or other identifi-
cation of the ship).
RX
J3E
GPS
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
Exit
*********
Group
********
---------
Call
---------
To:Group-1
Category:Routine
Traffic:J3E
TX
2134.0kHz
RX
2134.0kHz
Call
Freq:TX
2177.0kHz
RX
2177.0kHz
Write-Menu
Call
*********
Group
********
----
Call
frequency
----
TX:
†
2177.0kHz
RX:_2177.0kHz
OK
*********
Group
********
----
Call
frequency
----
Manual
set
T:
2177.0kHz
SHIP
R:
2177.0kHz
T:
2189.0kHz
INTER2-1
R:
2177.0kHz
Ç
OKSEL
*********
Group
********
--
Traffic
frequency
---
TX:
†
2134.0kHz
RX:_2134.0kHz
OK
*********
Group
********
--
Traffic
frequency
---
Manual
set
T:
2134.0kHz
IC-M801-1
R:
2134.0kHz
T:12345.0kHz
IC-M801-2
R:12345.0kHz
Ç
OKSEL
*********
Group
********
-------
Group
ID
-------
0
†
_______
OK
*********
Group
********
-------
Group
ID
-------
Manual
set
Group-1
023456789
Group-2
023456788
Group-3
023456787
Group-4
023456786
Group-5
023456785
Ç
OKSEL
IC-M801E_0.qxd 05.12.2 16:32 Page 23
To Next Page
Loading...
