Icom IC-M801E - I Group Call; I Geographical Area Call

35
8
WHEN RECEIVING A CALL
8
2001 NEW
■ Group call
q When receiving an Group call, beeps may sound
and “Group” is displayed as below.
• Push any key to stop the beeps.
w Push [ENT] to listen to the traffic frequency for an
announcement from the calling ship (mother ship
in your group).
e Communicate via the handset or microphone with
the ship when the calling ship requires such.
r Push [FREQ/CH] to return to DSC watch mode.
RX
J3E
<
Traffic >
Lat
34 34'N
Lon134
34'E
12:34
Exit
GPS
************************
*
Group *
*
ICOM M801 *
************************
TrafficExit
Calling station’s name appear when
the same ID is preprogrammed.
■ Geographical area call
NOTE: The IC-M801E will not function for the geo-
graphical call when your position is out of the spec-
ified area.
q When receiving a geographical area call and your
position is in the specified area, “Geographic”
is displayed as below.
• Push any key to stop the beeps
w Push [ENT] to select the traffic frequency, and lis-
ten for an announcement from the calling station.
• Rotate [CH] to scroll text to see the hidden lines infor-
mation.
e Push [FREQ/CH] to return to DSC watch mode.
RX
J3E
<
Traffic >
Lat
34 34'N
Lon134
34'E
12:34
Exit
GPS
************************
*
Geographic *
*
123456789 *
************************
TrafficExit
IC-M801E_0.qxd 05.12.2 16:32 Page 35