EasyManua.ls Logo

Icom IC-M801E - Printing DSC Memory Contents

Icom IC-M801E
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
8
WHEN RECEIVING A CALL
2001 NEW 2001 NEW
Received information
When receiving a DSC call, the received format spec-
ifier and its contents are memorized into the RX mem-
ory. Distress calls (including other calls with a distress
category) are stored separately from other calls.
Up to 20 distress and up to 20 other calls can be mem-
orized.
q During DSC watch mode, push [RX
CLAR
] to enter
the received DSC memory select screen.
Or, push [MODE
SET
], rotate [CH] to select “RX mem-
ory” then push [ENT].
w Rotate [CH] to select the desired category from
Distress” and “Others” then push [ENT].
•“<No data>” is displayed beside category when no
received message is stored in the category.
e Rotate [CH] to select the desired DSC message.
•“*” means the DSC messages have not been read.
•“DTRS RLY” stands for distress relay.
Distress memory screen
Others memory screen
r Push [ENT] to indicate the contents.
Rotate [CH] to scroll text to see hidden lines informa-
tion.
t Push [MODE
SET
] to return to DSC watch mode.
NOTE:
When the DSC message with “?” symbol is se-
lected in step e, the message “DATA ERROR” is
displayed at the bottom of the line in memory con-
tents screen in step r.
******
RX
memory
*******
-------
Distress
-------
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
******
RX
memory
*******
--------
Select
--------
123456789
111111111
123123123
123456788
SEL OK
Ç
Individual
DTRS
RLY
Geographic
Individual
*
*
******
RX
memory
*******
--------
Select
--------
123456789
111111111
123123123
SEL
OK
Ç
12:34
23:45
21:54
*
******
RX
memory
*******
--------
Select
--------
Distress
Others
Ç
OKSEL
When the desired memory contents to be deleted
are displayed as at right, push and hold [CE] for
1 sec.
After erasing, the receive memory select screen, as in
step r above, is selected automatically.
The DSC memory, which 48 hours or more have been
passed from received, can only be deleted.
******
RX
memory
*******
-------
Distress
-------
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
Deleting a memory
IC-M801E_0.qxd 05.12.2 16:32 Page 30

Table of Contents

Related product manuals