EasyManua.ls Logo

Icom IC-M801E

Icom IC-M801E
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Distress relay call
2001 NEW
33
8
WHEN RECEIVING A CALL
8
q When receiving a distress relay call, an emergency
alarm sounds and the display below appears.
w Push any key to stop the alarm, if desired.
e Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select “RX
memory“ screen.
Select “Others” with [CH] then push [ENT].
Push [ENT] again.
The received distress relay call memory (DTRS
RLY) is displayed at the top line with “*” symbol.
When the ship is close to you, communication should
be monitored continuously.
The traffic frequency is monitored even when the mem-
ory contents is displayed.
DD
Distress relay acknowledgement call
operation
The distress relay acknowledgement call can be
made only when distress relay call is received.
q After receiving a distress relay call, push
[FREQ/CH] to return to DSC watch mode.
w Push [MODE
SET
] to select the DSC menu.
e Rotate [CH] to select “Distress RLY ACK,”
then push [ENT].
•“Distress RLY ACK” selection is available only
when distress relay call is received.
r Rotate [CH] to select the distress call to be replied,
then push [ENT].
t The calling stand-by screen is displayed as fol-
lows, verify the calling condition then push and
hold [CALL] for 1 sec. to transmit the call.
***
Distress
RLY
ACK
***
---------
Call
---------
To:001234567
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
Call
***
Distress
RLY
ACK
***
--------
Select
--------
OK
SEL
001234567
007654321
Ç
*******
DSC
MENU
*******
--------
Select
--------
Position
Individual
Group
Geographical
Distress
Distress
RLY
Distress
RLY
ACK
Semi/Auto
Test
RX
memory
TX
memory
Set
up
Selt
test
Exit
Ç
OKSEL
******
RX
memory
*******
-----
Distress
RLY
-----
From:001234567
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
Exit
GPS
************************
*
Distress
RLY
*
*
001234567
*
************************
TrafficExit
IC-M801E_0.qxd 05.12.2 16:32 Page 33

Table of Contents

Related product manuals