54
12
CONNECTION AND INSTALLATION
2001 NEW 2001 NEW
DD
Mounting angle attachment
q Attach the supplied rubber feet to the mounting
angle, if desired.
w Attach the mounting angles using with the supplied
hex head bolts
(M6×15), flat and spring washers as
illustrated below.
Hex head bolt (M6×15)
Flat washer
Mounting angle
Spring washer
DD
Mounting the main unit
Hex head bolt (M6×50)
Flat washer
Spring washer
Nut (M6)
Flat washer
Spring washer
Drill six holes of 6 mm (
1
⁄4 in)
in diameter.
R
WARNING! NEVER mount
the transceiver main unit overhead.
The weight of the unit is approxi-
mately 8.5 kg, but its apparent weight
will increase several fold due to wave
shocks or vibration. The unit must be
mounted on a flat hard surface only.
IC-M801E_0.qxd 05.12.2 16:32 Page 54
To Next Page
Loading...
