26
2001 NEW 2001 NEW
7
CALL PROCEDURE
■ Semi/Auto (telephone) call
The frequency for telephone call use are specified by a
coast station, therefore, two calls/acknowledgements
are usually necessary before making a telephone call.
q Push [MODE
SET
] to select the DSC menu.
w Rotate [CH] to select “Semi/Auto” call, then
push [ENT].
e Rotate [CH] to select “Calling” then push
[ENT].
r Select the desired pre-programmed telephone
number or “Manual set,” then push [ENT],
• Use [CH] to select the telephone number when pre-pro-
grammed.
• When “Manual set” is selected, enter the desired
telephone number via the keypad.
t Rotate [CH] to select the desired coast station
code, then push [ENT].
• When “Manual set” is selected, enter the desired
code (last 7 digits only) via the keypad.
-The first 2 digits “00 (double zero)” are fixed for the
coast station code.
y Rotate [CH] to select 1st telecommand, then push
[ENT].
u Verify your position and time, then push [ENT].
• When the position or time requires a change, use the
keypad and [CH] for settings.
• [CH] moves the cursor.
i Select the desired pre-programmed transmit and
receive call frequency with [CH], then push [ENT].
******
Semi/Auto
*******
----
Call
frequency
----
OK
Manual
set
T:
2177.0kHz
SHIP
R:
2177.0kHz
T:
2189.5kHz
INTER-2
R:
2177.0kHz
Ç
SEL
******
Semi/Auto
*******
---
Position
&
time
----
Latitude
Longitude
UTC
34
34'N
134
34'W
12:34
Null
OK
******
Semi/Auto
*******
OKSEL
---
1st
telecommand
----
J3E
F1B/J2B
TTY-FEC
F1B/J2B
TTY-ARQ
Ç
******
Semi/Auto
*******
------
Address
ID
------
00
†
______
OK
******
Semi/Auto
*******
------
Address
ID
------
Manual
set
Port
ICOM
001234567
Port
ABC
001234566
Port
M801
001234565
Ç
OKSEL
******
Semi/Auto
*******
--------
Number
--------
†
_______________
OK
******
Semi/Auto
*******
--------
Number
--------
Manual
set
ICOM1
1234567890123456
ICOM2
1234567890123457
Ç
OKSEL
******
Semi/Auto
*******
--------
Action
--------
Calling
Answer
Setting
Ç
OKSEL
IC-M801E_0.qxd 05.12.2 16:32 Page 26
To Next Page
Loading...
