What to do if no contact possible with another station using Icom ID-1?
If you cannot contact another station using your Icom Transceiver, the other station might be using tone squelch; in this case, turn the tone squelch function ON. Also, check if your transceiver is set to duplex; if so, set it to simplex.
General| Brand | Icom |
|---|---|
| Model | ID-1 |
| Category | Transceiver |
| Language | English |
Provides definitions for terms used in the manual.
Essential warnings for safe operation, covering RF exposure, electrical hazards, and environmental factors.
Identification and function of the transceiver's front panel components.
Identification and function of the transceiver's rear panel ports and connectors.
Description of the PTT switch, UP/DOWN switches, and lock switch on the microphone.
Overview of the PC control application's main screen, menus, and toolbars.
Details on using the RC-24's display, keypad, and buttons for transceiver control.
Explanation of the various indicators displayed on the transceiver's function display.
Procedure for unpacking the transceiver and selecting an appropriate operating location.
Instructions for connecting the antenna and power supply to the transceiver.
Connecting the microphone and external speaker to the transceiver.
Steps for establishing USB and Ethernet connections between the transceiver and a PC.
Step-by-step guide for installing drivers on Windows XP.
Guide for installing drivers on Windows 98 and Windows Me.
Instructions for installing drivers on the Windows 2000 operating system.
Verifying the driver installation and identifying the assigned COM port number.
Preparing the transceiver, controlling power ON/OFF, and configuring COM port settings.
Adjusting squelch, audio levels, and selecting operating modes (FM, DV, DD).
Methods for setting frequency, including tuning dials, keypads, and direct input.
Selecting tuning step increments and enabling the RC-24 lock function.
Selecting between FM, Digital Voice (DV), and Data (DD) operating modes.
Programming your call sign for Digital voice and data communications.
Setting call signs for specific stations and repeaters for digital communications.
Procedures for transmitting and receiving voice communications in FM mode.
Procedures for transmitting and receiving voice communications in Digital voice mode.
Managing received digital calls, call records, and automatic indications.
Sending and receiving short text messages during Digital voice operation.
Using the monitor function and selecting monitoring modes (DIGITAL/ANALOG).
Overview of the D-STAR system, its features, and operational concepts.
Basic principles of repeater operation and a step-by-step setup flowchart.
Procedures for accessing FM and Digital repeaters, including settings and call signs.
Configuring repeater tone frequencies and offset frequencies for repeater operation.
Overview of data communication, wireless LAN, and internet access features.
Important warnings and precautions for data transmission and file handling.
Steps for configuring and accessing the internet via the transceiver's data mode.
Procedure for transferring files between PCs using the transceiver's data capabilities.
Using the transceiver for low-speed data communication, enabling simultaneous voice and data.
Description of memory channels, call channels, and their programming capabilities.
Methods for selecting memory and call channels using the application or RC-24.
Steps for programming frequencies, modes, and other data into memory and call channels.
Copying memory channel contents to VFO or other memory/call channels.
Methods for clearing programmed memory channel contents.
Programming alphanumeric names for memory channels for easier identification.
Displaying programmed memory names instead of frequencies during memory mode.
Overview of Programmed Scan, Mode Select Scan, and Memory Scan.
Procedures for initiating and terminating scan operations.
Setting scan edge frequencies (PA/PB) within memory channels.
Setting memory channels to be skipped during scanning operations.
Selecting scan resume conditions like timer scans or pause scan.
Description of Memory Channel Watch and Call Channel Watch.
Procedures for operating priority watch from the application or RC-24.
Using pocket beep for alerts and as a pager in FM and Digital voice modes.
Configuring squelch functions based on tone, digital code, or call sign.
Accessing and adjusting various transceiver settings via Set Mode.
Configuring Digital Code, Monitor, Repeater Tone, and CTCSS Tone.
Settings for scan resume, standby beep, auto reply, and auto received call registration.
Configuring Auto RxCall Disp, Auto MyCall Disp, and Key touch beep settings.
Settings for DV Data Tx and Digital repeater call sign configuration.
Settings for auto message indication, LCD dimmer, and cooling fan control.
Configuring the auto repeater function and RC-24 lock function.
Operating the transceiver in EMR mode for specific Digital voice reception.
Using the break-in function for communications in Digital voice and data modes.
Adjusting squelch using S-meter and enabling AFC for frequency tuning.
Steps for resetting the transceiver's CPU and initializing all settings.
Common problems, their causes, solutions, and reference page numbers for troubleshooting.
Instructions for identifying and replacing a blown fuse in the transceiver.
Technical specifications for the transceiver, including general, transmitter, and receiver parameters.
List of optional accessories and system requirements for software operation.
To Next Page
