3
Terminal mode operation
20
D Setting “TO” (Destination) to make a call
■ Operating in the Terminal mode
Example: Making a call to a specific station
1. Push [ENT].
• Displays the TO SELECT screen.
3. Select the destination. (Example: “Rick”)
• “Rick” is displayed in “TO.”
2. Select “Your Call Sign.”
4. Hold down [PTT] to transmit.
• While transmitting, the TX/RX indicator lights orange.
L While receiving a signal through the Internet, you
cannot transmit.
5. Release [PTT] to receive.
L If you cannot receive a reply, see page 32 to read
the tips to solve the problem.
The call sign
of the selected
station is
displayed.
To Next Page
Loading...
