Icom rs-ba1 - Step 4: Remote Station PC Settings

Installtion guide B
B-6
This section describes how to setup the Remote station (Client) PC.
Before conguring the settings, connect a speaker and microphone, or a headset to the Remote station’s PC.
Before conguring the settings, turn ON the radio.
See the RS-BA1 Instruction Manual (“4. SETTINGS FOR A REMOTE STATION PC” section) for details.
1
Open the Remote Utility.
1. Double-click the “Remote Utility” icon on
your desktop to open the Remote Utility.
2. “Please set your own PC information” is
displayed, then click <OK>.
L When you rst open the Remote Utility, this
screen is displayed.
2
Congure the settings.
L When you rst open the Remote Utility, this screen
is displayed.
Click <OK>, and then restart the Remote Utility.
Step4. Settings on the Remote station’s PC
1. 2. 3. Step4. 5.
3
Click
1Enter
2Conrm
3Select
4Select
5Click
6Click
Click the Setup that you want to do.
L If no Servers and no radios are registered, this
screen is displayed.
Click
4
Start the Setup Wizard.
Click
5
Enter the Server Information.
1Enter
2Click