Icom rs-ba1 - Page 88

4
SETTINGS FOR A REMOTE STATION PC
60
■ Server registration
D To add a Server (Continued)
1
Open the Add a Server screen.
1. Click the <Server List> tab.
2. Click <Add>.
2
Enter the Server Information.
1. Enter the Server Address or Network Name.
2. Conrm the Control port number.
L You should use the default port number for this
port.
3. Click <Next>>.
1Enter
3Click
1Click
2Click
About Server Address or Network name
When connecting to the network through a PC
• When conguring the remote control system
through a LAN, enter IP address or computer
name of the Base station’s PC. (pp. 38 to 44)
• When conguring the remote control system
through the Internet, enter domain name or public
IP address of the Base station’s PC. (pp. 43 to
44)
When connecting to the network directly
• When conguring the remote control system
through a LAN, enter IP address of the radio or
network name*. (pp. 54 to 55)
• When conguring the remote control system
through the Internet, enter domain name or public
IP address of the Base station. (pp. 56 to 57)
* For only the IC-7851, IC-7850, and IC-7610.
2Corm