Idemia MorphoWave SP - MorphoWave SP Technical Specifications

24
MorphoWave Compact - 2018_2000035853-v81
2.5 > MorphoWave SP Technical Characteristics
Item
Description
Access control modes
Identification (search for fingerprints in a local database)
Authentication with contactless smartcard, with or without
fingerprint check
Multi-factor: identification or authentication
Proxy: the access control check is fully driven by a remote system
Man Machine Interface
User feedback LED Panel
Buzzer
Biometrics
Hand swipe through the active volume without contact:
40 x 25 x 80 mm (WxHxD) capture volume
(1.57’’ x 0.98’’ x 3.14’’)
0.5 m/s (19.7 in/s) maximum hand speed
Up to 4 fingers capture capacity per swipe motion
False Acceptance Rate (FAR) adjustable from 1% down to 10
-7
%
Database capacity: 10 000 users
Log capacity
1 000 000
LAN/WLAN connection
For terminal configuration and data transfer:
Ethernet 10/100 Base T (MDI, MDI-X)
Or Wi-Fi
™
Wireless LAN (option), WEP, WPA (PSK) and WPA2
(PSK) encryption available
Either TCP, SSL or TLS protocol
Note: for UL compliance, the connection is for supplemental use
only and is not evaluated by UL