Table of content
1 / Introduction 7
1.1 > MorphoWave SP terminal 8
1.2 > Scope of the document 9
1.3 > Safety Instructions 10
1.4 > Wiring Recommendations 11
1.5 > Regulatory, safety and Environmental notices 12
1.5.1 > European Union (CE) regulatory notices 12
1.5.2 > USA (FCC) regulatory notices 13
1.5.3 > Canada (IC) regulatory notices 14
1.6 > Other recommendations 15
1.7 > Recommendations for terminal implementation 16
2 / General description 19
2.1 > Box opening 20
2.2 > Components of the initial package 21
2.3 > Terminal's front view description 22
2.4 > Terminal's rear view description 23
2.5 > MorphoWave SP Technical Characteristics 24
3 / Installation procedure 27
3.1 > Before proceeding to the installation 28
3.2 > Installation 29
3.3 > Step by step procedure 30
3.3.1 > Drill the mounting holes 31
3.3.2 > Make the connections 32
3.3.3 > Attach the base plate on the wall 35
3.3.4 > Attach the device on the base plate 36
3.3.5 > Connect the connector assembly on the device 37
3.3.6 > Close the device on the base plate 38
4 / Electrical interface 40
4.1 > Wiring overview 41
4.2 > Power Supply 42
To Next Page
Loading...
