Idemia MorphoWave SP - Page 6

6
MorphoWave Compact - 2018_2000035853-v81
4.3 > Output Relay 44
4.4 > Tamper Switch 45
4.5 > Wiegand wiring 46
4.6 > Wiegand output 47
4.7 > Serial port wiring 49
4.8 > GPIO wiring 51
4.9 > Ethernet connection 52
4.10 > Internal USB connection 53
4.11 > Wi-Fi
™
dongle installation 55
5 / User interface 57
5.1 > Modes for controlling access rights 58
5.1.1 > Introduction 58
5.1.2 > Identification mode 58
5.1.3 > Authentication (verification) mode 58
5.1.4 > Multi-factor mode 59
5.1.5 > Proxy mode 59
5.1.6 > External database mode (also called polling mode) 60
5.1.7 > Anti-tamper / anti-pulling switches 60
6 / Recommendations 61
7 / Annex 1 : finger placement recommendations 65
7.1 > Main principles 66
7.2 > Capture recommendations 67
7.2.1 > Proper Use 67
7.2.2 > Improper Use 68
8 / Annex 2 : Bibliography 69
8.1 > How to get the latest versions of documents 70
8.2 > Documents about the MorphoWave SP terminal 71
9 / Annex 3 : Support 72
9.1 > Troubleshooting 73
9.2 > Technical Support and Hotline 73