94
ifm Programming Manual ecomatmobile BasicController (CR0403) Runtime System V03.02 2015-04-01
ifm function elements ifm function elements for the device CR0403
>
Parameters of the outputs
7789
Parameters Data type Description
RESULT BYTE feedback of the function block
(possible messages → following table)
Possible results for RESULT:
Value
dec | hex
Description
0 00 FB is inactive
1 01 function block execution completed without error
14 0E FB is active
CANopen manager configures devices and sends SDOs
15 0F FB is active
CANopen manager is started
238 EE Error: CANopen configuration is too large and cannot be started
239 EF Error: CANopen manager could not be started
242 F2 Error: setting is not possible
To Next Page
