IFM IO-Link master-PROFINET AL1102 - PROFINET Configuration

IO-Link Master with PROFINET Interface StandardLine 8 Ports IP 65 / IP 66 / IP 67
33
>
9.2 PROFINET
Content
Install GSD Files .....................................................................................................................................34
Integrate the IO-Link master in the project .............................................................................................35
Configure the IO-Link master .................................................................................................................35
Configure IO-Link ports ..........................................................................................................................36
Configure IO-Link devices ......................................................................................................................37
Read and write cyclic process data ........................................................................................................38
Read I&M datasets .................................................................................................................................39
Detect diagnostics and alarms ..............................................................................................................39
34541
On the field bus side, the device can be configured with the following options:
 PROFINET projection software STEP 7 (version 5.5 SP 4 or higher)
 PROFINET projection software TIA portal
Further information about operation and functions of the PROFINET parameter setting
software:
► Use the help function of the PROFINET projection software!