27
Use SIP ALG option
This option is sometimes used when a NAT (Network Address Translation) routing setup is preventing VoIP
from working.
Call Hold Version
Defines what standardised method Budii Lite
®
should use to put calls on hold.
Telephony Hook Flash Timer
This setting controls the timing of the “hook flash” button for call waiting.
Telephony tone country setting
Different countries use different frequency tones to control calls.
VoIP SIP Port
See the Glossary entry on Ports for more information. SIP is the protocol that sets up and completes VoIP call
connections. Its default port is 5060.
Re-registration time interval
When you register your SIP address with a server where you can be contacted by VoIP, this registration expires.
This setting controls when your registration expires. Bear in mind, however, that the SIP registrar might have a
different re-register interval that could override yours.
To Next Page
Loading...
