IKONIX Associated Research Hypot III User Manual

54
COFF <value>
Continuity Offset
ACW
DCW
0.00-0.50Ohms
7.2.4. System Parameter Editing Commands and Companion Queries
These commands are used to modify the system parameters for the instrument.
These
commands require a parameter value to be included with the command.
Command
Name
Value
PLC {1|0}
PLC Remote ON/OFF
1=On, 0=Off
SSTP {1|0}
Single Step ON/OFF
1=On, 0=Off
SGFI {1|0}
Smart GFI
1=On, 0=Off
ALAR <value>
Alarm Level
0-9
CNTR <value>
Contrast Level
0-9
RLT {L|A|P}
Result Setting
L=Last, A=All, P=P/F
7.2.5. Query Commands
These query commands will retrieve data from the instrument. These commands
include functions for retrieving test data, test results and remote hardware.
Command
Name
Value
*IDN?
Identification
Query
Associated Research Inc., Model
Number, Serial Number, Firmware
Revision
TD?
List Testing
Data
Data from test in Process
RD <step number>?
Result Data
Query
1-3
SALL?
List Step
Parameters
Response:
SALL
memory+step,type,p1,p2,p3…
RR?
Read Reset
Query
1=Open, 0=Closed
RI?
Read Interlock
Query
1=Open, 0=Closed
*IDN?
Read the instrument identification string. Company = Associated Research Inc.
TD?
Read the active data being displayed on the LCD display while the test is in process. It
will also read the last data taken when the test sequence has completed. Each
parameter is separated by commas and includes step number, test type, test status,
and metering. The syntax for this command response is {memory - step, test type,
status, meter 1, meter 2, meter 3}. ACW test displays 4 meters. Each meter will
contain both the value and the units. In the case of DCW current where both uA and

IKONIX Associated Research Hypot III Specifications

General

Brand	IKONIX
Model	Associated Research Hypot III
Category	Measuring Instruments
Language	English