66
10.2. Warranty Requirements
Associated Research, Inc. offers a standard 1-Year manufacturer’s warranty. This
warranty can be extended an additional (4) years provided that the instrument is
returned each year to Associated Research, Inc. for its annual recertification. In order
to be eligible for the extended warranty instruments must be returned to Associated
Research, Inc. for certification service at least once every twelve months.
A return material authorization number (RMA) must be obtained from Associated
Research, Inc. before returning this instrument for calibration. To obtain an RMA
number or for information regarding our warranty, please contact our customer
support representatives at 1-800-858-TEST (8378) or setup an RMA online at
http://www.asresearch.com/support/RMA-request.aspx
10.3. Calibration Initialization
Press and hold the Calibration key on the rear panel with a pen, pencil or small
screwdriver while powering on the Hypot III. The Hypot III enters calibration mode
after the power on sequence is complete. The Calibration screen will appear as
follows for the 3705, 3765 and 3770:
The Calibration screen will appear as follows for the 3780:
Calibration of Parameters
From the Calibration screens, use the “” soft key to scroll the cursor to the parameter
you wish to calibrate. Once the cursor is pointing to the parameter you wish to
calibrate, press the “Select” soft key. A Calibration Prompt screen will now appear
To Next Page
Loading...
Need help?
General