Imada ZTS Series - Gauge Settings and Locking; Setting the Lock Function

page 9
CAUTION
Apply tension or compression
forces in line with the
measuring shaft.
00.0
00.0
!
5.Setting LOCK (optional)
Prevents gauge settings from being changed.
1. Turn OFF the gauge. Press and hold
MENU,
then press
ON/OFF to turn ON the gauge
and enter the Setup Menu.
2. Press the up or down arrows on the keypad to
highlight Setting LOCK, then press the right
arrow key.
3. Press the up/down arrow keys to select ON/OFF and press
MENU to input your selection.
6. Press the left arrow key until the door icon
# appears, then press
and hold
MENU two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU to exit.
Setting LOCK
{
OFF
<Back } Enter@
Setup Menu
Language
# Setting LOCK >
Units