Imada ZTS Series User Manual

11 REFERENCE SECTION — PROGRAM MENU 6/6
page 39
Date and Time
Date Set
1. Turn ON the gauge, then press and hold
MENU
two seconds to enter the Program Menu. Press
the down arrow key to highlight Date and Time, then press the
right arrow key to select.
2. Press the up/down arrow keys to highlight Date Set and press
the right arrow key to select.
3. Press the up/down arrow keys to select year and press
MENU
to input your selection.
4. Press the up/down arrow keys to select month and press
MENU to input your selection.
5. Press the up/down arrow keys to select day and press
MENU
to input your selection.
6. Press the left arrow key until the door icon
# appears, then press
and hold
MENU two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU to exit.
Time Set
Set time in military format.
1. Follow Date Set step 1, above.
2. Press the up/down arrow keys to highlight Time Set and press
the right arrow key to select.
3. Press the up/down arrow keys to select hour and press
MENU
to input your selection.
4. Press the up/down arrow keys to select minute and press
MENU to input your selection.
5. Press the left arrow key until the door icon
# appears, then press
and hold
MENU two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU to exit.
7
Program Menu
Display Functions
# Date and Time >
High Low Setpoints

Imada ZTS Series Specifications

General

Display	LCD
Sampling Rate	2000 Hz
Measurement Units	N, kgf, lbf
Data Output	USB, RS-232
Power Supply	AC adapter or battery
Battery Life	Approx. 8 hours
Operating Temperature	0°C to 40°C
Storage Temperature	-10°C to 50°C (14°F to 122°F)
Accuracy	+/- 0.2% F.S.