page 42
11 REFERENCE SECTION — SETUP MENU 3/4
Date Format
Select: YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY
Factory Default=‘YY/MM/DD’
1. Press and hold
MENU, then press ON/OFF to turn ON the
gauge and enter the Setup Menu. Press the down arrow key to
highlight Date Format, then press the right arrow key to select.
2. Press the up/down arrow keys to select and press
MENU to
input your selection.
3. Press the left arrow key until the door icon
# appears, then press
and hold
MENU two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU to exit.
6
Setup Menu
Send Functions
# Date Format >
Language
Send Functions
Store current value(s) in memory when SEND is
pressed.
Select: Display Value, + Peak, – Peak, +/– Peak
Factory Default=‘Display Value’
1. Press and hold
MENU, then press ON/OFF to turn ON the
gauge and enter the Setup Menu. Press the down arrow key to
highlight Send Functions, then press the right arrow key to select.
2. Press the up/down arrow keys to select and press
MENU to
input your selection.
3. Press the left arrow key until the door icon
# appears, then press
and hold
MENU two seconds to exit. Or press the left arrow
key and when ‘Exit Menu’ appears, press
MENU to exit.
5
Setup Menu
Zero/Tare Reset
# Send Functions >
Date Format
To Next Page
Loading...
Need help?
General
