Immergas AUDAX PRO 4 V2 - 13 Completion of Installation

49
13
COMPLETION
OF INSTALLATION.
- Check the following aer having completed the installation.
Installation
Outdoor unit
- Check the external surface and the inside of the outdoor unit.
- Is a short-circuit possible?
- Is the position well ventilated and is there clearance space for assistance?
- Is the outdoor unit firmly fixed?
Indoor unit
- Check the external surface and the inside of the indoor unit.
- Is the position well ventilated and is there clearance space for assistance?
- Check whether the centre of the indoor unit is fixed and if it is installed horizontally
Adding refrigerant
- Are the length and difference between the refrigerant pipes within the admissible range?
- Is the pipe suitably insulated?
- Has the amount of additional refrigerant been weighed correctly?
Installation of drain pipe
- Check the drain pipe of the outdoor unit and of the indoor unit.
- Was the drain test completed?
- Is the drain pipe suitably insulated?
Perform the wiring
- Was the outdoor unit earthed 3?
- Is a 2-wire cable used?
- Is the length of the wire within the limited range?
- Is the wiring path correct?