IDS 430/433 Users Manual Version 1.0
- 25 -
Set Beginning Sequence Number
Use the numeric keypad to enter number 1. The display prompts "reg 1" for 1
second and then displays the current value. Press the CLEAR key if no change is
to be made, or enter a new value and then press the ENTER key. The next
sequence number printed will be the entered value +1.
Notes
• The ID file maintenance functions are password level 1 protected. If a
password has been configured (function 64) the operator will be prompted for
the password before the file maintenance menu is displayed.
• ID memory is cleared to zero at power up unless parameter 41 (battery back
up enable) is set to 1.
• Maximum amount of ID’s 529.
To Next Page
Loading...
Need help?
General