Need help?Do you have a question about the InfiNet Wireless R5000 and is the answer not in the manual?
Describes the manual's structure, chapters, product features, and abbreviations.
Details types of Indoor Power Supply Units (IDU-CPE, IDU-BS, Injector, E1/T1).
Describes various Outdoor Unit models and their characteristics.
Explains the status indications provided by ODU LEDs.
Covers components, placement, poles, grounding, and specific model installation steps.
Details how to solder RJ-45 connectors for service cables.
Lists necessary tools for performing the installation.
Details the mounting kit, assembly, and alternative installation methods.
Covers initial settings, device interfaces, CLI, and IP formats.
Details lost password recovery, saving, exporting, and firmware updates.
Explains setup for radio and Wi-Fi interfaces.
Covers bitrate, frequency, power, and range calculations.
Introduces tools for link testing and analysis (Ltest, Muffer, Load Meter, RapidView-1).
Describes capabilities and prerequisites for web management.
Covers general device, radio, and network interface configurations.
Details network link, MAC switch, IP firewall, and QoS configurations.
Displays status of device interfaces and neighboring links.
Tools for detailed link analysis and antenna alignment.
Performs link throughput tests on various bitrates.
Advice on high bitrates, base station sector design, and asymmetry.
Addresses "bad subscriber" problems and TDM transmission.
Wiring diagrams for various connectors (RJ-45, Console, E1).
General| Wireless Standard | 802.11a/n/ac |
|---|---|
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Operating Temperature | -40°C to +60°C |
| Antenna Type | Integrated antenna |
| Channel Bandwidth | 5, 10, 20, 40 MHz |
| Modulation | QPSK, QAM16, QAM64, QAM256 |
To Next Page